Lindy HDMI 10.2G EDID Emulator

Continuously emulates HDMI EDID information Supports resolutions up to 3840x2160@30Hz including HDCP pass-through For use with 32120 for cloning Powered via HDMI Source Interface 2 Year warranty The Lindy HDMI 10.2G EDID Emulator Adapter is designed for systems that require EDID signals to be continuously provided without interruption and helps overcome EDID related problems which can occur when using AV/KVM extenders, switches and splitters. It can also be used in place of a monitor to keep the graphics card of a PC or server awake for remote access via IP. With support for resolutions up to 2160p including the ability to passthrough HDCP content, the Emulator is suitable for use with a wide variety of PC and AV applications. When used with the Lindy HDMI / VGA / DVI EDID Recorder (32120) this compact device can provide cloned EDID information to your graphics card.It is also possible to use the Emulator without cloning a display as it comes complete with preset EDID data for the most commonly used resolution/timing combinations, please see the Technical Information section for a full breakdown.*Please note: This Emulator does not support HDMI 2.0 or HDCP 2.2 content. If you require this then please see our complete range of EDID emulators Ports & interfaces Connector 1 gender Male Connector 2 gender Female Connector 2 HDMI-A Connector 1 HDMI-A Performance Compatible products Lindy 32100 Maximum resolution (HDMI) 3840 x 2160 pixels Data transfer rate 18 Gbit/s Housing material Acrylonitrile butadiene styrene (ABS) Product colour Black Operational conditions Operating temperature (T-T) 0 - 60 °C Storage temperature (T-T) -10 - 70 °C Relative humidity 0 - 80% Certificates Certification REACH, CE, FCC Compliance certificates RoHS Weight & dimensions Weight 8 g Height 12.3 mm Depth 43 mm Width 24 mm Packaging content Manual Yes Packaging data Package type Polybag Package height 138 mm Package width 136 mm CE Declaration of Conformity leaflet